Categories: Railway Maintenance-35
Product Short Description: Fully active cleaner specially formulated for the removal of “STICKER” & tuff oily stains residues. Sticker removed and cleaning is actived with out the need for Scrubbing or Brushing which can cause mechanical damages to discs and result in poor perfor
Product Description:

REMOVING LABEL ::: very effective to remove sticky mess of LABEL ( After peeling off the Label ) Also very usefull for removal of vinyl graphics from boats, signs, trucks, and glass, Cleans and removes adhesive caulking and bedding compounds, Cleans glue residues, resin, and hardener.

Fully active cleaner specially formulated  for the removal of “STICKER” & tuff oily stains residues. Sticker removed and cleaning is actived with out the need for Scrubbing or Brushing  which can cause mechanical damages to discs and result in poor performance. Field test have shown that RXSOL-15-1017 is very gentle with personnel and on metallic colour surface.“RXSOL-15-1017” should always be used at full strength to obtain maximum benefits.

RXSOL-15-1017 is a unique formulation of powerful surfactants and  organic solvents.It does not contain any chlorinated solvents of Phenols & has less than 10% Aromatics & surfactants in the product do not contain any alkyl phenol ethoxylates.

Trick ::  Before peeling off the label, use a hair dryer to soften the adhesive. The label will probably come off cleanly, but if it leaves a sticky residue, wait for the piece to cool and try removing it with some RXSOL-15-1017 on a soft paper towel or cotton ball. Any residue remaining after using RXSOL-15-1017 should be removed with RXSOL  Multi-Surface Cleaner with Vinegar. 

Email Tempelate ::: http://www.kirantiwari.com/sticknsol/index.html

Same Family PRODUCT :::  http://www.rxmarine.com/BIOSOL

Product Application:

Product Uses:-STICK-N-SOL “RXSOL-15-1017”  is a fully active cleaner specially formulated  for the removal of “STICKER” & tuff oily stains residues. Sticker removed and cleaning is actived with out the need for Scrubbing or Brushing  which can cause mechanical damages to discs and result in poor performance. Field test have shown that “RXSOL-15-1017” is very gentle with personnel and on metallic colour surface.“RXSOL-15-1017” should always be used at full strength to obtain maximum benefits.

 Product-Application:- Manually apply “RXSOL-15-1017”neat by brush or hand spray. Allow few seconds contact time to penetrate the soiled / covered area, then sticker will come up by smooth way.

Product Dose:

Cleaning time  will vary depending on the extract nature and thickness of deposit  to be removal. Stubborn deposits should be scrubbed to assist the cleaning operation. Your local Rx CLEANSERS representative will work with you to design the optimum  concentration & procedure for your system.

Product Note:

Characteristics:- 

  • Unique chemical formulation.
  • Non- toxic.
  • Extends time between cleans.
  • Safe to handle.
  • Effective removal of STICKER/CARBON DEPOSITS.
  • Can be applied by all normal methods.
  • Formulated to be very cost effective.
  • Does not contain chlorinated hydrocarbons.
  • Can be used on all metals & most painted surfaces.
  • Environmentally friendly.
  • Non-Corrosive.
  • 100% Active.
  • Dries Completely.
  • Does not require special feeding equipment for safe application.
  • Reduce downtime and maintenance costs. 
Free Delivery / Supply Locations : 
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates