Your shopping cart is empty.
Aquatuff high foam liquid always be wise decision to clean ship cargo hold. As before loading of cargo surveyor first demand is - Holds must be thoroughly cleaned and dry and trace free of previous cargo in frames.
Aquatuff high foam plays very important role in hold cleaning and general digressing. It is a heavy duty non-corrosive concentrated cleaning compound soluble in fresh and salt water , also suitable with high presure cleanig machines.
Most Helpfull cleaner for preparation of a cargo hold. In general cleaning of vessel's cargo holds Aquatuff High Foam plays very important role in washing down with use of chemicals. Aquatuff High foam classified as Marine Chemicals, Cleaning Chemicals; Cargo Hold Cleaning detergent.
Refer this link for complete set of HOLD CLEANING KIT ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier
The Importance High-Pressure Cleaning
The job of high-pressure cleaning can be done easier & quicker by simply using AquaTuff incorrect dosages. Using a high-pressure cleaner alone, without any CLEANER, will not achieve optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard surfaces, such as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:
Step 1: Spraying the AquaTuff over the area to be cleaned.
Step 2: Washing down the area using a high-pressure water jet.
After the AquTuff has been sprayed on the surface and before the wash down begins, the chemicals penetrate & thoroughly moistens dirt & other grime. During wash down, the AquaTuff thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results.In addition to being more effective, the use of AquaTuff substantially reduces the time required for the Cleaning operation, as well as preventing dirt from reforming on the surface. The use of AquaTuff in correct dosages is half the job done.
General Cleaning :- AquaTuff can be used for all types of cleaning & degreasing & may be applied by Brush, Hand spray, high and low-pressure washing machines etc. Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30 min. will suffice for most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If the cleaning solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on the degree of contamination AquaTuff should be mixed with warm water at a rate of 50-200 ml per 10 litres. i.e. 1 cup of AquaTuff to a bucket of water. The aqutuff solution can be applied simply by mops, brushes or rags, or by dipping the soiled articles into the Aquatuff solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, AquaTuff is not recommended for washing machines.
20-50 % with fresh water . Also acts as an acid-neutralizing agent for Boiler & Colling systems during cleaning & maintenance.
Heavy Soil deposition Use Undiluted from to 20-50% diluted with water.
Medium soil deposition 10-20% diluted with water.
Light Soil ( general degreasing ) 5-10% diluted with water.
For degreasing and removal of residues of minerals oil , coal stain and soot from surface.
superior & powerful alkaline cleaner. It is low toxic product with an exceptional solvency power on soil & oily matter & having good foaming qualities. It is free from Hydrocarbon solvents , Biodegradable and minimizes the extreme hazards to personnel in handling materials .
Safety Phrases
S-2 Keep out of the reach of children.
S-26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S-36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S-45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).