Canada Chemicals is one of the leading Filter Cleaner Engine Oil Exporters, Manufacturers, Suppliers, and Producers in Vancouver, Montreal, Ontario, Toronto, Hamilton, Ottawa Canada. We are supplied to various industrial markets including Household, Institutional Cleaning, Personal Care, and Industrial sectors including Oil fields, chemical, Animal feed additive, Food additive, Agrochemical, Fertilizer, pharmaceuticals, water treatment, Minerals, Lubricants, Marine Industry, Metal Working chemical industry, and Coatings markets.

Filter Cleaner Engine Oil is Very useful to clean Fuels precipitation of paraffin and asphalt or with lubricating oils mixing of different types of oil can form solid encrustations on the mesh. It is a heavy-duty emulsifying liquid, which is Extremely and effectively removes tenacious carbon deposits, burnt grease, oily residues, and lacquers, from fuel oil and lube oil purifiers, filters, separators. Effective cleaning of fine meshes is achieved by soaking in RXSOL-16-1095-025 followed by blasting with compressed air using a cleaning gun.

Alias: 
RXSOL 79127, Care clean Filter, Engine Oil Filter Cleaner, BOLL CLEAN 2000

Application: 
Mechanical cleaning (scrubbing and brushing )damages the filter which results in poor performance.

The cleaning process and requirement of time depend on the type of contamination. With fuels, precipitation of paraffin and asphalt, or with lubricating oils mixing of different types of oil can form solid encrustations on the mesh.

RXSOL-16-1095-025 can be undercooled or overheated during storage but remains fully usable when returned to normal temperature.

MESH CONTAMINATED WITH HEAVY OIL:

Elements contaminated with heavy oil must be soaked in a standard commercial aromatic solvent. After soaking the elements are cleaned by a high-pressure Cleaning Device using RXSOL-16-1095-025 solution.

INSTRUCTIONS FOR USE:

The use of RXSOL-16-1095-025 is not restricted to a particular method of cleaning. Depending on the operating conditions, RXSOL-16-1095-025 can be used in a dip bath, in a spraying plant, in a steam jet, or in a manual application using a cloth, brush, or sponge. It can be used warm or cold. RXSOL-16-1095-025 is miscible with water - even seawater.

Concentration for mesh cleaning: 1 : 2,5
Temperature: up to a maximum of 60 °C

The concentration depends on the type and thickness of the adhesive substance to be removed. When used in concentration below 1: 30 rinsing is usually not required. No visible film remains on the surface.

Using Procedure: 

It May be used directly or diluted in the ratio of 1 part concentrate to 5 parts water, ( or 1 . Ratio of any solvent like diesel )

Manual Cleaning of the Candle Filter Elements

NOTE ::: Drained the automatic filter by automatic back-flushing (i.e. all filter chambers).

1 Then soak the filter element assembly, with the openings of the candle elements facing down in a suitable tank filled with RXSOL-16-1095-025 solvent.

2 The soaking time completely depends on the cleaning method :
a)In cold RXSOL-16-1095-025 cleaner the maximum soaking time is 24 hours.
b)In hot solution the maximum soaking time is 12 hours.

3. After soaking remove the whole filter element assembly from the tank and dry to keep all parts in place it on suitable perforated sheet metal.

4. Then you may blow compressed air through the candles from the inside to the outside.

5. After this procedure the complete filter element assembly should be immersed in fresh cleaner, with the candle element opening down-wards, and rinsed through with an up and down motion.

6 Allow the filter element assembly to drain again and dry it by blowing compressed air through it again from the inside to the outside. The manual cleaning procedure described here has produced adequate results (ca. 60 % clean) in similar applications.

Note: CLEANING of the filter can be enhanced with a high-pressure machine.

We are trying our best to supply every chemical you may wish to buy. However, if there is something you can’t find, feel free to contact us and we will find just what you are looking for and offer you a competitive price. We guarantee that 100% of your parcel passes through the United States, Britain, Australia, Canada, Mexico, France, Germany, Spain, Belgium, Sweden, Poland, and Russia. We have large stocks in warehouses in the United States, Canada, Germany, and Mexico, and we can ship directly from overseas warehouses.

When you order in our company, we will immediately arrange shipment and update tracking information for you by email. In addition, we can also arrange door-to-door service delivering to your office or factory directly by our forwarders. For more information or to request a particular product, call customer services or Given website Email address.

chemicals@canadachemical.com